Engineered natural-timber panels for ventilated façades, siding, and soffits — with a genuine wood surface, not a printed imitation. Maintenance-free, sustainably sourced, and backed by a 10-year warranty.
Exterior Technologies Group brings Parklex Prodema — the Spanish specialist in engineered natural timber — to architects and specifiers across Canada. Using WoodResist technology, real wood veneers are transformed into panels that resist fire, water, and wear, then installed on ventilated façades, suspended ceilings, and interior walls with no further maintenance.
What sets Parklex Prodema apart is the surface: a layer of genuine natural timber rather than a printed paper décor. Every panel carries the depth, grain, and tonal variation of real wood — the aesthetic naturalness that wood-imitation products cannot reproduce — while the engineered core does the technical work behind it.
That core is what makes the timber behave. The boards are built to shrug off the most demanding exposure: after 3,000 hours of accelerated weathering — up to five times the regulatory requirement — NATURCLAD-W and NATURCLAD-B retain their appearance and contrast within standard tolerances. The surface composition protects the wood from extreme weather, eliminating any need for oiling, sealing, or refinishing over the life of the façade.
The line spans the whole envelope. NATURCLAD cladding panels sit on ventilated façades; NATURSIDING delivers the same timber as pre-machined boards with a fast closed-joint clip system; NATURSOFFIT handles covered horizontal surfaces and carries the same finishes indoors for true visual continuity; and the GRCLAD fireproof range swaps the cellulose core for a glass-reinforced one to reach non-combustible classifications for high-rise work.
ETG supports Parklex Prodema across Canada from finish selection through installation detailing. Panels can be supplied with the PEFC certificate and an Environmental Product Declaration (EPD), with documentation available for LEED credits — making the range a strong fit for sustainable civic, institutional, residential, and commercial projects, with a 10-year warranty on every product.
A real natural-timber face layer — not printed décor — giving authentic grain, depth, and tonal variation.
WoodResist surface protection means no oiling, sealing, or refinishing — backed by a 10-year warranty.
Standard panels reach B-s1-d0; the GRCLAD range classifies up to A2-s1-d0 as a non-combustible product.
Available with the PEFC certificate and an EPD, with documentation supporting LEED credit submissions.
From ventilated façade cladding to fast-fit siding, covered soffits, and non-combustible fireproof panels — each Parklex Prodema system shares the same genuine-wood surface and maintenance-free engineered core, so a single material palette can run across an entire building.
Natural wood and super-textured panels for ventilated façades. NATURCLAD-W carries a 0.6 mm natural-wood face; NATURCLAD-B uses a natural-wood veneer. Highly resistant to sun, pollution, and weather.
The same timber cut into pre-machined boards of varying widths, with a closed-joint clip system for fast, concealed installation — horizontal or vertical, with no visible screws or rivets.
Natural-wood panels for covered horizontal features — ventilated false ceilings and terrace soffits. The same finishes are available indoors, creating seamless visual continuity from outside in.
A fibreglass core impregnated with mineral-filled resins replaces the cellulose layer, producing a non-combustible panel that meets strict high-rise fire regulations — up to A2-s1-d0, tested to BS 8414.
NATURCLAD-W offers a palette of natural-wood tones; NATURCLAD-B adds a range of organic textured colours. A representative selection is shown below — the full finish library, including the new textured-colour panels, is available on request.
Overview of the NATURCLAD, NATURSIDING, NATURSOFFIT, and GRCLAD systems with finishes, panel formats, and warranty terms.
Specification support aligned with Canadian CSC NMS workflows for ventilated timber façade, siding, and soffit assemblies.
Environmental Product Declaration, PEFC certification, and LEED-credit documentation for sustainable Canadian building submissions.
Selected Parklex Prodema installations — civic, cultural, and residential projects where engineered natural timber wraps façades, soffits, and interiors with a warmth that printed materials cannot match.
Whether you're detailing a ventilated cladding façade, a fast-fit siding elevation, a continuous indoor-outdoor soffit, or a non-combustible high-rise wall, our team supports the design from finish selection through installation detailing — with EPD and PEFC documentation for LEED, and coordination for Parklex Prodema across Canada.